| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Epiphone Texan pickguard glue removal http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=53519 |
Page 1 of 1 |
| Author: | Colin North [ Sat Sep 12, 2020 5:20 pm ] |
| Post subject: | Epiphone Texan pickguard glue removal |
Got one in which had the pickguard removed several years ago. The glue has clumped in lumos I think it was removed with heat and a putty knife or similar. Owner wants it replaced. Any suggestions to remove the glue as the glue lumps seems totally impervious to methanol and naptha. |
|
| Author: | Smylight [ Sat Sep 12, 2020 6:01 pm ] |
| Post subject: | Epiphone Texan pickguard glue removal |
Just last week I had to clean old dried and dirty glue from both sides of a top. Two pickguards long gone, with the old glue having attracted all manners of stuff over the last 30 years. I used lots of naphta and finally this. Did it in a few passes, each time letting the stuff do its job for a bit longer so as not to disturb the underlying finish. It works great on water-based glues. I finally succeeded in getting the gunk out. Finished with naphta. https://www.stewmac.com/luthier-tools-a ... e-goo.html |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|